oblique stress
英 [əˈbliːk stres]
美 [əˈbliːk stres]
网络 斜应力; 斜向应力
双语例句
- Objective To evaluate the effects of varying load of vastus medialis oblique on the tensile stress at the proximal insertion of patellar tendon.
目的：探讨股内斜肌不同负载情况下髌腱近端内、外侧拉伸应力的变化。 - Under oblique loading, the stress increased obviously.
斜向载荷应力集中区移向根尖部，且牙体组织应力明显增大。 - This paper describes the problems remaining in the acting criteria for the calculating the break resistane of the oblique cross section of pre-stressed concrete beams with the major tensile stress method.
阐述现行规范主拉应力法计算预应力混凝土梁斜截面抗裂性能所存在的问题； - Combined with the result of a bridge with 20 ° oblique angle test, the author has analyzed the hollow slab girder bridge through 2 models of space grillage analogy unit and space entity unit separately. The analytical result of different section stress and defection are put forward.
结合一座斜交角为20°实桥的试验结果，分别利用空间梁格单元模型和空间实体单元模型对该空心板梁桥进行了理论分析，给出了不同截面应力、挠度的对比分析结果。 - For the overdenture retained by resilient soft-liner material, under vertical or oblique loading condition, the stress distribution of implant-bone interface and overdenture was comparative harmonious;
弹性软衬材料固位的覆盖义齿，垂直及斜向载荷时，种植体&骨界面及义齿本身应力分布较均匀，避免了较大的应力集中。 - Results: The stress concentration and the peak stress are different between the results under vertical load, and horizontal load and oblique load. The stress concentration is similar between the horizontal load and oblique load. The stress concentration under the oblique load is easily concentrated.
结果：垂直加载的应力集中部位和应力峰值与水平、斜向加载的结果不同，水平与斜向加载的应力集中部位近似，斜向加载更易产生应力集中。 - In this paper, solid rocket moter oblique nozzle contraction shells stress profile is analysed and calculated by means of finite element method.
对固体火箭发动机斜喷管收敛段壳体应力场采用有限元法进行了分析和计算。 - In this paper, stress distribution and strength for the frame of oblique edge shearer is analyzed by the method of testing stress for the model and of measuring dynamic stress for the frame on the spot.
在分析研究剪切机机架应力分布和强度时，采用模型实验应力分析和实测机架动应力相结合的方法。 - The numerical simulation was carried out for the dynamic response of crack subjected to the normal, shear and oblique impact loads. The dynamic stress field and the strain field were obtained.
对垂直、剪切以及斜向等各种冲击载荷作用下裂纹的动态响应进行了数值模拟，得到了一系列随时间变化的动态应力场以及应变场图； - Then, the equal difference lines and isoclinic lines can be depicted on the photo-elastic meter. At last, the distribution of stress on, rake face of cutting tool in the chip flow plane during oblique cutting is obtained using the stress severance method.
在光弹性仪中描绘等倾线、等差线，最后应用应力分离法获得斜角切削中流屑平面内刀具前刀面上的应力分布。 - A new type of oblique-toothed synchronous belt was designed with optimization method based on the analysis of internal stress distribution of the belt.
在用有限元分析同步带内应力分布状况的基础上，优化设计出一种新型的斜齿同步带。 - It may be concluded that for shallow strike slip earthquakes there are significant triggering effect, while for oblique slip and dip slip earthquakes tidal stress has very little triggering effect.
还可看出，对于浅源走滑型地震有较明显的触发作用，而对浅源斜滑及倾滑型地震则没有明显的触发作用。 - Inquire into the Design of Oblique Cone Shell with Stress Analysis Method
应力分析法进行斜锥壳设计的探讨 - The biggest stress under the concentrated oblique loading was 3-times than that under the concentrated vertical loading; The larger of the pontic length was the bigger of the stress.
长桥体固定桥在集中斜向载荷作用下种植体颈缘骨最大应力是集中垂直载荷下种植体周骨最大应力的3倍，桥体长度增加，应力值增加。 - There was no significant difference of biggest stress on the implant between concentrated oblique loading and dispersed oblique loading. The biggest stress of implant under oblique loading was 3 times as big as that under dispersed vertical loading.
斜向集中载荷与斜向分散载荷下种植体最大应力值无明显差异，大约是分散垂直载荷下种植体最大应力值的3倍； - Results ① The stress distribution in abutments under oblique loads at forty-five degrees was uneven and the peak value was 4-6 times higher than that under vertical loads. Stress concentration occurred with significant compressive stress.
结果种植体基台在斜向载荷下的最大应力值是垂直载荷下的4～6倍，且应力分布不均，有应力集中现象，以压应力为主。 - The formation of the right-lateral oblique thrust belts were controlled by the N-S oblique thrusting of South Qilian Orogeny and the main terrestrial stress came from the S-N intracontinental subduction of the north margin of Qaidam massive.
右行走滑冲断构造形成于南祁连由北向南的斜向推覆作用，而主要应力来源于柴达木地块北缘由南向北的陆内俯冲作用。 - Calculation of oblique nozzle contraction shells three-dimension stress profile by means of finite element method
斜喷管收敛段壳体三维应力场的有限元法计算 - On stress state, the linear transformation is taken as a mathematical model. By the theory of algebra, a new formula of shear stress in an oblique section is obtained, and its application to stress analysis is pointed out.
以线性变换作为应力状态的一个数学模型，利用代数的理论，得到了斜截面上剪应力的一个新公式，同时指出了它在应力分析中的应用。 - When a structural member with an oblique macroscopic crack bears a tow stress,ⅰ and ⅱ model mixed crack come into being.
带斜裂纹的构件受拉应力作用时，将产生Ⅰ、Ⅱ型复合裂纹。 - Results The overdenture retained by non-resilient material showed poor oblique loading resistance. The peak value of stress between implant neck and cortical bone was 2.4~ 9.2 times higher than that of vertical loading.
结果①无弹性材料缓冲的覆盖义齿对斜向载荷的抵抗性差，种植体颈部&皮质骨界面应力峰值为垂直载荷的2.4~9.2倍。 - The Study on Computational Method for Oblique Nozzle Stress of Pressure Vessel
压力容器斜接管应力计算方法研究 - The interface stress distribution under oblique loading is very different to that under vertical loading. Stress concentration is serious under oblique loading condition, which is bad for the well growth of the implant. 2.
结果1.斜向加载条件下，种植体-骨界面的应力分布与垂直加载条件下相应的应力分布存在显著差异，应力集中情况严重，不利于种植体的生长稳固。 - And design the inclined column by changing the oblique section inclined column section size to improve the stress distribution optimization method for the engineering design theory.
并提出了通过改变斜柱布置方案或计算调整斜柱截面积来改善双向斜柱间应力不均的设计方法，为实际工程设计提供理论依据。 - Western Yunnan undergone overall oblique uplift since the Quaternary, following different lift of blocks. Modern tectonic stress field in western Yunnan is characteristic of NE-direction compression and SW-direction extension.
第四纪以来滇西地区发生大面积掀斜抬升，并伴随块体的差异升降运动，构造应力场以北东向挤压、南西向拉张为主要特征。 - The total hull torsion caused by oblique wave and Unsymmetrical cargo loading happens together with horizontal bending and vertical bending, which makes the hull torsional deformation and warping stress obviously.
斜浪和货物的不对称装载等因素引起的船体扭转总与水平弯曲同时发生，而且和船体垂直弯曲合成，船体的扭转变形与翘曲应力十分突出。